Case study · Industrial Machinery
36-PART LIFTING TABLE DRAWING CREATION
Agentic 3D-to-2D drawing generation with Argus & SolidWorks
Tools
Argus · SolidWorks
Outcome
36 parts, 19 drawing sheets, 4 hours

Page 02
What’s inside
A walk-through of how Argus, working in SolidWorks, turned the 3D model of a scissor lifting table into a complete set of 2D drawings. How Argus planned the package, where the engineer approved, and what Argus put on the sheets.
SummaryA 36-part assembly with 17 unique parts, turned into 19 drawing sheets in about four hours. | P. 03 |
ProblemWhy a drawing package is slow to make manually: a sheet per part, and every sheet must agree. | P. 03 |
MethodologyHow Argus planned the package and where the engineer approved. | P. 04 |
ResultsThe 19-sheet package, and what each kind of sheet carries. | P. 05 |
Agent Drawing InputBeyond drafting: Argus chose material grades, fits, tolerances and finishes, shown on one sheet. | P. 06 |
Try ArgusHow to bring the same workflow to your own assemblies. | P. 07 |
Page 03
Summary
Argus turned a 36-part lifting table into 19 drawing sheets in about four hours.
Working in SolidWorks, Argus read the 3D assembly, planned the package sheet by sheet, and stopped for the engineer’s approval at four gates. The result: an assembly drawing with a BOM, an exploded view with balloons, and a drawing for each of the 17 unique parts, all on A3. Along the way, Argus chose materials, fits, geometric tolerances and surface finishes from what each part does.
36
Parts in the assembly, 17 unique
19
A3 drawing sheets
4
Hours, model to PDF
Session time as reported by the engineer, including approvals. Not a logged measurement.
Problem
Turning a 3D assembly into a drawing package is slow, repetitive work. Every unique part needs its own sheet, with aligned views, dimensions, notes and a title block, and every sheet has to agree with the BOM and with the parts it mates to. By the engineer’s estimate, this package would take an experienced CAD designer 1.5 to 3 working days manually. Argus produced it in about four hours.
01
Days of repetitive drafting
Views are placed and aligned, dimensions added feature by feature, and the title block filled in, one sheet at a time. The lifting table has 36 parts, 17 of them unique. Each unique part needs its own sheet, and the assembly drawing and exploded view add two more: 19 sheets in all.
02
Errors hide between sheets
Part numbers, materials and quantities must match the BOM, and mating parts need fits that work together: the pin on one sheet has to suit the bore on another.
+ Benefit to engineer
Argus drafts the whole package: plans the sheets, places and dimensions the views, builds the BOM, and adds materials, fits and finishes. The engineer approves at each gate and spends the time on design intent, not on placing views.
Page 04
Methodology
The engineer gave Argus one brief in SolidWorks: turn the lifting table assembly into 2D drawings, and ask for approval along the way. Argus read the model, found 17 unique parts and came back with a 19-sheet plan before opening a drawing. After four approvals, Argus drew the remaining 16 sheets without stopping.


Setting | Value | Source |
|---|---|---|
Sheet format | A3, first-angle projection, symbol on every sheet | ENGINEER |
Package structure | Assembly sheet, exploded view, one sheet per unique part | ENGINEER |
Sheet count | 17 unique parts found in the model, so 19 sheets | ARGUS |
Scales | Set per part, from 1:1 for small blocks to 1:10 for the assembly | ARGUS |
Dimensioning | Each feature dimensioned once, on its clearest view | ARGUS |
Materials | Chosen per part from its function in the assembly | ARGUS |
Explode strategy | Parts moved apart along their own axes | ARGUS |
Page 05
Results
The drawing package · Drawn by Argus
# | Sheet type | What it carries | Sheets |
|---|---|---|---|
01 | Assembly drawing | Four views, overall dimensions, working heights and the BOM | 1 |
02 | Exploded view | Every part pulled apart, with 17 balloons matched to the BOM | 1 |
03 | Part drawings | Aligned views, dimensions, material, notes and title block | 16 |
04 | Purchased part | The motor-gearbox: outline and mounting dimensions only | 1 |
19 A3 sheets · 17 BOM items · 5 materials · 4 surface-finish grades · 1 merged PDF
Argus drew every sheet, exported each to PDF and merged them into one package. Argus built the BOM from the model too: part number, description, material and quantity for all 17 items, with the motor-gearbox marked as purchased. The part sheets add H7/f7 fits where pins run in the slide blocks, geometric tolerances to datums, and surface finishes from Ra 12.5 on plates to Ra 0.8 on pin journals.

Sheet 2 · Bill of Materials
Every item gets a part number, description, material and quantity. First 7 of 17 shown.

Sheet 17 · Nut Crossbar M30
M30 thread and eight-hole circle, each called out once.

Sheet 9 · Motor Bracket
Every size in two views; one callout for all four holes.
Page 06
Agent Drawing Input
Argus did more than place views. Argus made four kinds of engineering call and put them on the sheets:

→
The engineer’s next move
Argus closed the session by proposing what to add next: weld symbols where parts are welded, and sign-off names and dates on every sheet. The engineer picks what goes forward.
Think through > click through.
Your AI agent for engineering workflows
Want to try Argus on your own drawing packages?
Visit www.cosmon.com to start a trial.
www.cosmon.com


